Horizontal single axis tracking system
Horizontal single axis tracking system means that PV modules are mounted on a horizontal axis and track the sun in the east-west direction along the horizontal axis. Horizontal single-axis tracking system is mainly composed of: solar cell module mounting bracket, horizontal rotating shaft, rotating driving mechanism, wind speed detection device and tracking controller.
The system is controlled by the tracking controller, with simple structure, easy installation, flexible response, good reliability and strong fault identification ability. Compared with traditional fixed inclination installation, the generating capacity can be increased by 15%-20% (depending on local conditions).
Technical Parameters | |
Tracking Range |
士 60° |
Driving System |
Slew drive, 28VDC motor |
Modules per Tracker |
Max.90 modules per tracker |
System Voltage |
1000 V or 1500 V |
Ground Coverage Ratio |
≥ 25% |
Foundation Options |
All foundation types |
Terrain Adaption |
Up to 20% N-S slope |
Structure Material |
Hot dipped galvanized/Pre-galvanized steel |
Power Consumption |
0.02kWh/day |
Power Supply Mode |
Powered by PV strings, back-up lithium battery |
Standard Design Wind Speed |
42m/s |
Module Supported |
All commercially available modules |
Operation Temperature |
-30℃ - 60℃ |
Control Algorithm |
Astronomical algorithms + Tilt sensor close loop |
Tracking Accuracy |
≤ 2° |
String-Powered |
Yes |
Backtracking |
Yes |
Communication Options |
LoRa wireless /RS 485 cable |
Night Position |
Yes |
http://www.hwltracker.com/